Enhanced Manhattan Islander Audio Amp
Designed by Jim Kortge, K8IQY Documentation by Larry Przyborowski, K3PEG

Notes and Feedback from Builders
If you wish to Protect the Template, WAØITP
K3PEG's suggests using clear acrylic spray paint. One of the most commonly available brand names is Krylon®, and I found a can of it at our largest discount department store. Any of the less espensive brands will work well also.

It is found in the paint section and the can I purchased is Krylon Crystal Clear Acrylic. It dries quickly and works perfectly in this application, and sells for a coupla bucks.

I applied two light coats on each side of the template allowing about 2 minutes drying time in between coats. The coats should be lightly fogged on by holding the can about 2 feet from the template and swooshing it around a little while spraying for about 5 seconds.

It should be noted that it isn't necesary to protect the template to use the EM method. It just seemed like the thing to do.
Click here for information on gluing pads
Click here for information on gluing the EM© Template to the board



72 and Enjoy the kit and the amp.