October 2004

	October 2004
	Saturday, October 23, 2004

October's gathering was shifted one week to allow 4SQRP'ers to attend the Grandview hamfest. Lots of home constructed stuff was brought for show and tell today.

As a special event, James ACØBN bought a car load of home built robots to show the group. This was an outstanding demonstration of technical construction enjoyed by all.

An enclosure kit door prize donated by Phil Anderson, WØXI from Alden McDuffie company was won by Tommy, WD5AGO. Thanks Phil!

We take over the back room at Barney's in Seneca for our monthly gathering.

Max, KCØMAX checking out the goodies on one of the show & tell tables.

Tommy, WD5AGO, Gene NØMQ and Joe WØMQY enjoying some good conversation over a glass of ice tea. Larry NØBHU and Max KCØMAX.

That's Bart WØIIT on the left talking with Cecil NØEHP (middle) and Larry NØBHU on the right. David, W2AYY from Jolpin, Missouri.

A special event today was a demonstration of several home built robots by James ACØBN. Tommy, James and Max are watching the line follower robot go around the line drawn on the white board.

A close-up photo of the line follower robot. It stayed on the line and never fell off the table! Jay, KØETC looking at the many different homebrew robots built by James.

One of the show & tell tables. A homebrew paddle made by Jay, KØETC.

A W8DIZ 10 MHz frequency standard built by Joe WØMQY. Several kits built by Max, KCØMAX. There is a DSW-20, a 4SQRP SWR/Power meter, an Arizona ScQRPion paddle and a 40 meter Rock Mite.

The second show & tell table has a Lowfer 185 kHz exciter built by Dave, WØCH and a LF loop antenna built by Jay, KØETC.

Back to Archive Index


We take over the back room at Barney's in Seneca for our monthly gathering.	Max, KCØMAX checking out the goodies on one of the show & tell tables.

Tommy, WD5AGO, Gene NØMQ and Joe WØMQY enjoying some good conversation over a glass of ice tea.	Larry NØBHU and Max KCØMAX.

That's Bart WØIIT on the left talking with Cecil NØEHP (middle) and Larry NØBHU on the right.	David, W2AYY from Jolpin, Missouri.

A special event today was a demonstration of several home built robots by James ACØBN.	Tommy, James and Max are watching the line follower robot go around the line drawn on the white board.

A close-up photo of the line follower robot. It stayed on the line and never fell off the table!	Jay, KØETC looking at the many different homebrew robots built by James.

One of the show & tell tables.	A homebrew paddle made by Jay, KØETC.

A W8DIZ 10 MHz frequency standard built by Joe WØMQY.	Several kits built by Max, KCØMAX. There is a DSW-20, a 4SQRP SWR/Power meter, an Arizona ScQRPion paddle and a 40 meter Rock Mite.

The second show & tell table has a Lowfer 185 kHz exciter built by Dave, WØCH and a LF loop antenna built by Jay, KØETC.