|
SSB-Mite
Text size too large or small? Use your Ctrl key and scroll wheel to adjust it.
.
Kitted and Offered For Sale By The Four State QRP Group
Temporarily out of stock Waiting on parts
The SSB-MITE is a high-performing SSB filter capable of being added to nearly any receiver. The SSB-MITE uses simple analog signal-processing circuitry to provide highly effective audio filtering from a simple circuit. It is designed to be very versatile, have low parts count, be inexpensive, yet provide outstanding performance. This is a flexible design that can be used as a stand-alone unit driving headphones, earbuds, or speakers, or it can be easily integrated into an existing receiver needing additional filtering (see manual for details).
Designed by David Cripe NMØS, the SSB-MITE provides very sharp passband filtering ideal for use with a SSB receiver. The implementation of this filter is with four op amps to create two low-pass filters, a notch filter, and one high pass filter. This frequency response creates a rapid roll off of frequencies above 3 kHz to reduce objectionable adjacent-channel noise.
The SSB-MITE has a number of assembly options depending on how it is to be used. It can be used as an outboard filter and amplifier, plugging into the headphone jack of an existing receiver, and driving a speaker or headphones. The SSB-MITE can be used as a high gain audio filter and speaker driver in conjunction with a homebrew receiver. Alternately, it may be used as an add-on audio filter internally, in conjunction with an existing receiver that might need a SSB filter. Each option has a different assembly sequence.
This low cost kit sacrifices nothing in the way of quality. It features a high quality printed circuit board,
low parts count, all through hole parts, and fast and easy building. It is an excellent kit
for first time builders.
First time builders please note: This kit is
not difficult to build, there are NO SMT parts and the parts are wide
spaced on the board making installation easy.
Specifications and Design Features
Passband Frequency: 300 to 3000 Hz.
Signal Gain: 0 dB to 50 dB, user selectable
Versatile: Drives speaker, earbuds, or headphones. Use standalone or install inside rig.
Audio Power: 500 mW into 8 ohms, from 9v supply
DC Power: 5 to 13 VDC at less than 15 mA
NO SMT Parts: All through hole parts..
NO Toroids: There are no toroids to wind, special circuits simulate them.
PCB: High Quality, silk screened, two sided 38.1 x 50.8mm printed circuit board.
Documentation
Assembly Manual
Parts List
Schematic
Frequency Response Chart
Part Layout
Photo Page
Elecraft's Excellent Capacitor Identification Page Posted with permission.
Electronics 2000's Excellent Resistor Code Graphic Calculator Posted with permission.
The SSB-Mite is carefully kitted and shipped by Dennis Gaskill, KCØIFQ. and Dick Hammond, NØTGR.
Please direct kit and part related questions to Dennis
All proceeds are applied toward funding OzarkCon.   Thank you for supporting The Four State QRP Group.
|